- EVOlution Tanks
- Parts & Accessories
- Drip Tips
- Xtar Chargers
No Special products
SvoёMesto Nivel V3/Semovar Mod...
SvoёMesto Nivel V3/Semovar Mod 18650 (Brushed)
SvoёMesto Nivel V3/Semovar Mod 18650 (Brushed) manufactured in Germany. The SM Nivel V3 chip chooses between variable wattage and variable voltage from 5-15 Watts or 3-6 Volts. It is able to fire atomizers down to one Ohm.
SvoёMesto Nivel V3/Semovar Mod 18650 (Brushed) manufactured in Germany. Instead of a 510 connection, the Kayfun V3 and V3.1 can be mounted via hybrid connection using the hybrid collectors tank (sold separately), thus the atomizer and the APV fuse into one compact unit.
The SM Nivel V3 chip chooses between variable wattage and variable voltage from 3-15 Watts or 3-6 Volts. It also sets the display brightness as well as choosing whether the button, the display or both shall be illuminated during usage. All settings are saved and restore automatically after battery exchange. It is able to fire atomizers down to one Ohm.
This mod comes prepacked with an 18650 tube. 18350 and 18490 tubes can be purchased separately.
- Direct-current voltage (not pulsed)
- Lowest fireable resistance - 1 ohm
- Variable voltage and wattage via SM Nivel V3 chip
- Adjustable positive and negative connections
- Maximum amperage 3.0A-3.5A
- Reverse battery protection
Using the menu
To access the menus and change settings, you will press the button the indicated number of times and wait a second while the screen changes from the initial display to an adjustable display. At the adjustable display, you are able to edit the settings to customize your vape for you.
When the atomizer is attached:
- 3 presses - "ON" - Turn on
- 4 presses - "dn" - Set your voltage/wattage down
- 5 presses - "UP" - Set your voltage/wattage up
- 6 presses - "rA" - Check the resistance of your atomizer
- 7 presses - "Ub" - Display remaining battery life in volts (4.2v fully charged, 3.2v dead). Can also be used to check your voltage under load
When the atomizer is NOT attached:
- 6 presses - "SP" - Set power, increase 0.2w increments from 3-10w, 0.5w increments from 10-15w
- 7 presses - "SU" - Set voltage, increase in 0.1v incremnts
- 8 presses - "rA" - Check the resistance of your atomizer
- 9 presses - "Ub" - Display remaining battery life in volts (4.2v fully charged, 3.2v dead). Can also be used to check your voltage under load
- 10 presses - "Sd" - Set display, change the intensity of the LED
- 11 presses - "SL" - Set LED, change which LED (Button or display, both, or none) will light up when vaping
- 12 presses - "H" - Vape timer reset. First screen is hours, second screen is minutes. If you push the button a second time, you will see “CL”. This will reset the counter if you press the button again
- 13 presses - "Fr" - Firmware version